Six Types of Asphalt

August 19, 2020 6:19 pm Published by Leave your thoughts

As you travel along the road, search for a parking space or pull into your driveway, you may not recognize the many types of asphalt around you. It’s easy to overlook the types of asphalt pavement in Washington that surround you every day, but if you plan to repave, make repairs, or create a new asphalt surface, knowing the types of asphalt becomes extremely important. Following are the top six types of asphalt pavement with which you should be familiar:

  • Porous asphalt: If you’re planning a paving project that will need high-level drainage, porous asphalt is a good choice. This type of asphalt in Washington allows water to seep through its surface, so your parking lot or other surface doesn’t become easily flooded. This is a cost-effective solution that typically offers a lifespan of around 20 years.
  • Quiet pavement: Noisy roads can be a nuisance, especially near residential areas. To keep the disturbance to a minimum, you can choose quiet pavement. Options include open-grade friction course mixes and stone-matrix asphalt. These surfaces reduce the noise on the highway, so nearby homes and businesses can enjoy quieter surroundings.
  • Perpetual pavement: This is a great option if you need to minimize traffic disruptions and save time on your paving project. This pavement involves a combination of multi-layer paving and asphalt. It provides a durable finish that typically requires little maintenance and delivers a long lifespan. This makes perpetual pavement an economical solution for many projects.
  • Hot-mix asphalt: As you drive along the highways and interstates, this is one of the types of asphalt in Washington that you’re most likely to encounter. It is the most commonly used type of asphalt on roads across the nation. It is used for paving both residential and commercial roads, resurfacing and patching. However, it can only be used when the weather is warm, because in cooler temperatures it cools quickly and becomes too rigid to properly cover the surface.
  • Warm-mix asphalt: To create this asphalt, technicians use the same process as required for hot-mix asphalt, but they are able to drastically reduce the temperature. By creating the asphalt at a temperature of 50 to 100 degrees Fahrenheit lower, they can use less fuel and produce fewer greenhouse gases.
  • Thin overlays: Creating a thin overlay involves the use of recycled materials and warm-mix asphalt. Adding this overlay reduces the amount of stress on the pavement. It also helps reduce noise levels on the road. Because it adds a layer of protection, it also reduces costs of repairs.

Choosing your asphalt

Not sure which types of asphalt in Washington are best for your paving projects? Contact Jimini Paving. We’ve been offering affordable paving solutions since 1985. We are a full-service contractor specializing in residential and commercial asphalt laying. We offer asphalt cutting, repairs, sealcoating, patchwork and all forms of road and parking lot maintenance. We are your one-stop source for all your asphalt paving needs. Reach our experienced team at 360-426-9918 with any questions or to get started on your next project.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *